Danby Ice Maker Repair in Tampa Bay
We fix Danby ice makers at your home in Pasco, Hillsborough and Pinellas counties. Call with the model number and the error code, if there is one, and the technician will bring parts that fit.
Fix Now Appliance is an independent repair company, not affiliated with or authorized by Danby. Danby is a trademark of its owner, used here only to describe the appliances we repair.
Danby ice maker error codes
What the code on the display usually means. Codes differ between models and years, so if yours isn't here or the meaning doesn't match, call and read it to us.
| Code | What it usually means |
|---|---|
| E1 | Temperature sensor fault. Sensor isn't reading temperatures accurately, affecting ice production. |
| E2 | Water fill error. The ice maker isn't filling with water as expected. Often a blocked or defective inlet valve. |
| E3 | Evaporator fan error. Issues with the fan, which can impact cooling and ice production. |
| E4 | Low water pressure. Insufficient water pressure can prevent the ice maker from producing ice effectively. |
| E5 | High condenser temperature. The condenser is operating at a higher temperature than normal, which can disrupt the cooling cycle. |
Common Danby ice maker problems
No ice
A failed water inlet valve, a frozen fill tube, a clogged water filter or a bad ice maker module.
Small or hollow cubes
Low water pressure, a clogged filter or a weak inlet valve.
Leaking
A cracked fill tube, a loose supply line or a leaking inlet valve.
Ice tastes bad
An old water filter or ice that has been sitting too long.
Check these before you call
If one of these fixes it, you don't need us.
- Make sure the ice maker switch or wire arm is in the on position.
- Replace the water filter if it's more than six months old.
- Check the freezer temperature. If the freezer is too warm, the problem is the freezer, not the ice maker.
Repair or replace?
A new ice maker module for most refrigerators is an inexpensive part. Replacing the whole refrigerator for an ice maker problem is almost never worth it.
Three steps, no surprises
- 1
Call or send a request
Tell us the brand, model and what's wrong. The technician brings the parts most likely needed.
- 2
Get a firm price
We find the fault and quote the exact cost before touching anything. The diagnostic is $89, and it comes off the bill if you go ahead with the repair.
- 3
Fixed and tested
Most repairs are done on the same visit. You pay after it's tested in front of you and get a written warranty.
Tell us what's wrong
Send the form and we'll call you back during business hours. In a hurry? Calling is faster.
(727) 425-27077 days a week, 8 AM–6 PM
fixnowappliance@gmail.comDanby ice maker repair questions
Are you an authorized Danby service center?
No. Fix Now Appliance is an independent repair company, not affiliated with Danby. If your Danby ice maker is still under the manufacturer's warranty, call Danby first, because their warranty repair is free. Once it's out of warranty, we can fix it.
We just installed a new ice maker and there's no ice yet. Is it broken?
Probably not. Most new ice makers take up to 24 hours to make the first batch.
Something stopped working?
7 days a week, 8 AM–6 PM. Most repairs done on the first visit.