Amana Oven Repair in Tampa Bay
We fix Amana ovens at your home in Pasco, Hillsborough and Pinellas counties. Call with the model number and the error code, if there is one, and the technician will bring parts that fit.
Fix Now Appliance is an independent repair company, not affiliated with or authorized by Amana. Amana is a trademark of its owner, used here only to describe the appliances we repair.
Amana oven error codes
What the code on the display usually means. Codes differ between models and years, so if yours isn't here or the meaning doesn't match, call and read it to us.
| Code | What it usually means |
|---|---|
| F1 | Control board fault. Potential failure in the oven's control board that may require resetting or replacement. |
| F3 | Temperature sensor error. Shows that the oven's temperature sensor is reporting values outside of the expected range and may need replacement. |
| F9 | Door lock error. The oven's self-cleaning latch fails to lock or unlock properly. |
Common Amana oven problems
Won't heat
On electric ovens, the bake or broil element, the temperature sensor or the control board. On gas ovens, a weak igniter is the most common cause: it glows, but not hot enough to open the gas valve.
Burns or undercooks food
A failing temperature sensor, or the oven needs to be calibrated.
Door stays locked
Usually after self-clean. A door lock motor or switch has failed.
F code on the display
Most F codes mean the control can't read the temperature or a key is stuck. See the error codes on our brand pages.
Check these before you call
If one of these fixes it, you don't need us.
- Check the breaker on an electric oven, or that the gas valve behind the range is open on a gas one.
- Make sure the oven isn't set to delay start or Sabbath mode.
- If the door is locked after self-clean, let the oven cool completely. Many stay locked until they're below a set temperature.
Repair or replace?
Ovens usually last a long time and most parts are replaceable. A failed control board on an older budget range is the one case where we may suggest replacing it.
If you smell gas, leave the house and call your gas company from outside.
Three steps, no surprises
- 1
Call or send a request
Tell us the brand, model and what's wrong. The technician brings the parts most likely needed.
- 2
Get a firm price
We find the fault and quote the exact cost before touching anything. The diagnostic is $89, and it comes off the bill if you go ahead with the repair.
- 3
Fixed and tested
Most repairs are done on the same visit. You pay after it's tested in front of you and get a written warranty.
Tell us what's wrong
Send the form and we'll call you back during business hours. In a hurry? Calling is faster.
(727) 425-27077 days a week, 8 AM–6 PM
fixnowappliance@gmail.comAmana oven repair questions
Are you an authorized Amana service center?
No. Fix Now Appliance is an independent repair company, not affiliated with Amana. If your Amana oven is still under the manufacturer's warranty, call Amana first, because their warranty repair is free. Once it's out of warranty, we can fix it.
My oven shows an F code. Can I keep using it?
Better not. Many F codes mean the oven can't read its own temperature. Turn it off at the breaker and call us with the code.
Do you repair wall ovens and double ovens?
Yes, including built-in models from Wolf, Thermador, Bosch and KitchenAid.
Other oven brands we repair
Something stopped working?
7 days a week, 8 AM–6 PM. Most repairs done on the first visit.