KitchenAid Stove Repair in Tampa Bay
We fix KitchenAid stoves at your home in Pasco, Hillsborough and Pinellas counties. Call with the model number and the error code, if there is one, and the technician will bring parts that fit.
Fix Now Appliance is an independent repair company, not affiliated with or authorized by KitchenAid. KitchenAid is a trademark of its owner, used here only to describe the appliances we repair.
KitchenAid stove error codes
What the code on the display usually means. Codes differ between models and years, so if yours isn't here or the meaning doesn't match, call and read it to us.
| Code | What it usually means |
|---|---|
| F2-E0 | Keypad disconnection. Keypad isn't communicating properly with the electronic control board. |
| F5-E1 | Door latch not operating. Door latch doesn't lock or unlock properly. |
| F3-E2 | Temperature sensor error. Temperature sensor is reading temperatures inaccurately and may require replacement. |
| F6-E4 | Miscommunication between control boards. Communication failure between the main control board and the display board. |
| F9-E0 | Incorrect stove configuration. This error occurs if the stove's settings are not configured correctly after installation or repair. |
Common KitchenAid stove problems
Gas burner won't light
A dirty or wet igniter, a cracked igniter, a burner cap that isn't sitting flat, or a failed spark module.
Igniter keeps clicking
Moisture under the burner cap after cleaning, or a faulty burner switch.
Electric burner won't heat
A burned-out element, a bad burner switch or a loose connection.
Burner stuck on high
The burner control switch has failed.
Check these before you call
If one of these fixes it, you don't need us.
- Make sure burner caps sit flat and are completely dry. Spills after cleaning are a common reason a burner won't light.
- On a coil stove, swap the element with one from another burner. If the problem moves, you only need a new element.
Repair or replace?
Stovetop repairs are usually small. A cracked glass top is the expensive one, and on an older range it can make sense to replace the whole unit.
If you smell gas, leave the house and call your gas company from outside.
Three steps, no surprises
- 1
Call or send a request
Tell us the brand, model and what's wrong. The technician brings the parts most likely needed.
- 2
Get a firm price
We find the fault and quote the exact cost before touching anything. The diagnostic is $89, and it comes off the bill if you go ahead with the repair.
- 3
Fixed and tested
Most repairs are done on the same visit. You pay after it's tested in front of you and get a written warranty.
Tell us what's wrong
Send the form and we'll call you back during business hours. In a hurry? Calling is faster.
(727) 425-27077 days a week, 8 AM–6 PM
fixnowappliance@gmail.comKitchenAid stove repair questions
Are you an authorized KitchenAid service center?
No. Fix Now Appliance is an independent repair company, not affiliated with KitchenAid. If your KitchenAid stove is still under the manufacturer's warranty, call KitchenAid first, because their warranty repair is free. Once it's out of warranty, we can fix it.
Can you replace a cracked glass cooktop?
Usually, yes, if the part is still made for your model. Send us the model number and we'll check the price before we come out.
Something stopped working?
7 days a week, 8 AM–6 PM. Most repairs done on the first visit.