Amana Dishwasher Repair in Tampa Bay
We fix Amana dishwashers at your home in Pasco, Hillsborough and Pinellas counties. Call with the model number and the error code, if there is one, and the technician will bring parts that fit.
Fix Now Appliance is an independent repair company, not affiliated with or authorized by Amana. Amana is a trademark of its owner, used here only to describe the appliances we repair.
Amana dishwasher error codes
What the code on the display usually means. Codes differ between models and years, so if yours isn't here or the meaning doesn't match, call and read it to us.
| Code | What it usually means |
|---|---|
| F1 | Water heating fault. Problem with the water heating system. |
| F2 | Water fill fault. Dishwasher is having trouble filling with water. |
| F3 | Water drain fault. Problem with draining water from the dishwasher. |
| F4 | Thermistor fault. The dishwasher's thermistor or temperature sensor is faulty. |
| F5 | Spray arm fault. There's a problem with the spray arm movement or function. |
| F6 | Water tap closed. Water supply to the dishwasher is interrupted or not turned on. |
| F7 | Flow meter fault. The dishwasher is experiencing issues with the flow meter or water intake. |
| F8 | Water level fault. Problems detected with the water level inside the dishwasher. |
| F9 | Continuous water inlet. Water continues to enter the dishwasher due to a possible valve failure. |
| F10 | Motor control fault. There's a problem with the dishwasher's motor or its control circuit. |
Common Amana dishwasher problems
Water left in the bottom
A clogged filter or drain hose, a jammed drain pump, or a garbage disposal knockout plug that was never removed when the dishwasher was installed.
Dishes come out dirty
Clogged spray arms or filter, water that isn't hot enough, or a weak wash pump.
Leaking
A worn door gasket, a cracked spray arm, a leaking inlet valve, or regular dish soap used by mistake.
Won't start or stops mid-cycle
A door latch switch, the control board or a thermal fuse.
Check these before you call
If one of these fixes it, you don't need us.
- Pull out and rinse the filter at the bottom of the tub. Many models need this every month.
- Run the kitchen tap until it's hot before you start a cycle.
- If it was just installed and won't drain, check the knockout plug in the garbage disposal inlet.
- Check the breaker, and the wall switch under the sink if you have one.
Repair or replace?
A leaking tub or a failed control board on an older, low-end dishwasher can cost more than replacing it. We'll quote first so you can decide.
Three steps, no surprises
- 1
Call or send a request
Tell us the brand, model and what's wrong. The technician brings the parts most likely needed.
- 2
Get a firm price
We find the fault and quote the exact cost before touching anything. The diagnostic is $89, and it comes off the bill if you go ahead with the repair.
- 3
Fixed and tested
Most repairs are done on the same visit. You pay after it's tested in front of you and get a written warranty.
Tell us what's wrong
Send the form and we'll call you back during business hours. In a hurry? Calling is faster.
(727) 425-27077 days a week, 8 AM–6 PM
fixnowappliance@gmail.comAmana dishwasher repair questions
Are you an authorized Amana service center?
No. Fix Now Appliance is an independent repair company, not affiliated with Amana. If your Amana dishwasher is still under the manufacturer's warranty, call Amana first, because their warranty repair is free. Once it's out of warranty, we can fix it.
Why does a cycle take two or three hours?
Many newer dishwashers run that long on a normal cycle to save water and energy. That's by design, not a fault.
Why does my dishwasher smell?
Food stuck in the filter is the usual reason. Clean the filter and run a hot empty cycle with dishwasher cleaner.
Something stopped working?
7 days a week, 8 AM–6 PM. Most repairs done on the first visit.